The Toilet’s Running… Again

Posted on Posted in Plumbing

Your toilet running is one of the most irritating problems that you can have regarding a broken toilet. It can become expensive to continually need a plumber Pittsburgh PA services to fix the toilet. Luckily, there are items that you can do to keep from having to call in the professionals.

 

Check The Level

If you are having concerns with your toilet, check the water in the back of the tank. You have to make sure that the water level is where it is supposed to be. Check the float and ensure that it is adjusted so that the water is shutting off before it will reach the top of the overflow tube. When the level is high, it flows into the tube and causes the toilet to run continuously. Most bathrooms have a marking or a line on the tube that will show you where the water level should be.

Some homes have an older style valve. This valve has a float that is on the arm. If yours has this, you can bend the arm so that the water will stop at the right level. Just be careful not to break it and not to turn it too much. Other valves use a free cup and a vertical post. If your toilet has this, make sure that you spin the post. The manufacturer’s guidelines will tell you how to do this. Make sure that you refer to the guidelines to ensure that you are correctly raising or lowering the point of shut-off successfully. Sometimes, this is enough to prevent professional toilet repair Pittsburgh.

 

Flapper Seal

Sometimes, the water level is excellent, but the toilet still continuously runs. It could mean that the flapper is not sealing correctly. The flapper can be found on the bottom of the tank. To check the flapper, life the lid to the tank and figure out what type of flapper is in your toilet. There are situations that you will have to replace the flapper. Knowing what type, you can prevent you from buying the wrong kind. All you must do to find out if your flapper isn’t correctly working is to put some food coloring in the tank. If the coloring makes its way to the bowl without you flushing the toilet, it would mean that there is some leak. The flapper is supposed to keep the water in the tank. So, if the dye makes it way to the bowl, you probably need to replace the flapper.

 

Know When Not To Do It Yourself

You may be able to handle easy problems with the toilet on your own. There are other small things that you can fit by yourself. There are other times when a problem is severe, and you are not going to be able to do it. There are times you will need a professional. There are going even to be times that you must repair the toilet. When this happens, it is highly essential that you find professional Pittsburgh toilet installation to complete the task for you. If you try to do it yourself, you could make the problem worse and cost yourself more money in the end. It is essential to know when you can and can’t handle the problem on your own.

 

READ MORE: Water and Gas Lines: Virtually Unnoticeable Until Broken